POLYSTYREN WALL INSULLATION
Light wet method will insulate all your walls. In the first stage, thermal insulation tiles are fixed to the wall. Monolayer strengthen is aded to cover the outer plaster, thereby forming a two-layer wall. When insulating system is laid on the old walls, which do not meet the requirements of thermal insulation. That insulation system is made very good, because you will save about 30% of the cost spent on home heating.
The new Amunesc system (once called jointless insulation system, is now increasingly popular in the EU, also known as the ETICS system). It
involves sticking polystyrene foam boards to the existing outer surface, you then add a layer of render, followed by an adhesive mesh. You then
add an additional primer render, followed by the final coloured render finish of your choice.
AVAL SYSTEM (ETA) - with standard and elasticized polystyrene boards (EPS)
The system is designed for installation of the external wall insulation of buildings - it may be used both on the rendered/plastered facades and rough walls made of bricks and blocks (ceramic, cement-lime, stone, of aerated concrete and concrete – monolithic or precast).The main characteristicsThe system meets European technical requirements - designed for thermal insulation systems throughout the European Union.
A complete set of materials for thermal insulation installation - provides full and checked compatibility of all components, which is particularly important during the subsequent years of system operation.
General - purpose – enables the choice from the widest range of adhesives, renders and paints within one insulation system.The main parameters• European Technical Approval ETA No. ETA-06/0187